You are here: Home page » Products » Feed Storage

Feed Storage

PS-System offers different types of feed bins. So there are polyester silos as well as feed bins consist of galvanised steel sheets available. Here you get an overview about our types of feed storage in detail.

  • Type MEX
  • Inside Silo
  • Galvanised Feed Bins

Polyester Silo Type MEX

The bodies of the feed bins type MEX are manufactured in two parts (the silo body and the cone), which can then be assembled perfectly on site. The body of the silo is conical. This silos are especially intended for the agricultural sector. The bins are equipped with a 4-feets pedestral consist of galvanized steel, a white cap against solar radiation and a structural engineering calculation for Germany. The feed bins type MEX are available in different sizes from 6 to 30 m³. The outlet is diameter 440 mm with a horizontal flange. The outlet height is 850 mm.

Art. No. Model External Ø Capacity Height
01-02-0015 MEX 6 2.200 mm 3,6 t 4.340 mm
01-02-0016 MEX 8 2.200 mm 4,8 t 5.040 mm
01-02-0008 MEX 10 2.200 mm 6,0 t 5.640 mm
01-02-0009 MEX 12 2.200 mm 7,2 t 6.240 mm
01-02-0010 MEX 14 2.200 mm 8,4 t 6.920 mm
01-02-0011 MEX 18 2.520 mm 10,8 t 7.040 mm
01-02-0012 MEX 20 2.520 mm 12,0 t 7.540 mm
01-02-0013 MEX 25 2.520 mm 15,0 t 8.850 mm
01-02-0014 MEX 30 2.520 mm 18,0 t 10.440 mm
01-02-0055 MEX 30+ 2.800 mm 18,0 t 7.740 mm
01-02-0057 MEX 40 2.800 mm 24,0 t 9.730 mm
01-02-0059 MEX 50 2.800 mm 30,0 t 11.900 mm

Trevira Silo

Our feed silos are made of breathable, dustproof and high strength polyester fabric, which provides a good food quality without clumping and mold growth. The silos are available in many different designs. The bulk density is a maximum of 0.6 t / m³;. By default, each silo is delivered with a ground clearance of 650 mm and an outlet diameter of 440 mm. Other dimensions on request. The inside silos are supplied unassembled.

Art. No. Model Frame Dimensions Capacity Height
01-04-0002 F10/15 1,10 x 1,10 m 1,20 m³ 2.250 mm
01-04-0004 F10/20 1,10 x 1,10 m 1,70 m³ 2.750 mm
01-04-0006 F10/25 1,10 x 1,10 m 2,30 m³ 3.250 mm
01-04-0008 F12/16 1,30 x 1,30 m 1,60 m³ 2.350 mm
01-04-0010 F12/20 1,30 x 1,30 m 2,20 m³ 2.750 mm
01-04-0012 F12/24 1,30 x 1,30 m 2,80 m³ 3.150 mm
01-04-0014 F12/28 1,30 x 1,30 m 3,50 m³ 3.550 mm
01-04-0016 F12/32 1,30 x 1,30 m 4,10 m³ 3.950 mm
01-04-0018 F12/36 1,30 x 1,30 m 4,70 m³ 4.350 mm
01-04-0020 F12/40 1,30 x 1,30 m 5,30 m³ 4.750 mm
01-04-0022 F15/22 1,60 x 1,60 m 3,50 m³ 2.950 mm
01-04-0024 F15/26 1,60 x 1,60 m 4,40 m³ 3.350 mm
01-04-0026 F15/30 1,60 x 1,60 m 5,30 m³ 3.750 mm
01-04-0028 F15/35 1,60 x 1,60 m 6,50 m³ 4.250 mm
01-04-0030 F15/40 1,60 x 1,60 m 7,60 m³ 4.750 mm
01-04-0032 F15/45 1,60 x 1,60 m 8,80 m³ 5.250 mm
01-04-0034 F18/22 1,90 x 1,90 m 4,60 m³ 2.950 mm
01-04-0036 F18/25 1,90 x 1,90 m 5,70 m³ 3.250 mm
01-04-0038 F18/30 1,90 x 1,90 m 7,20 m³ 3.750 mm
01-04-0040 F18/35 1,90 x 1,90 m 8,90 m³ 4.250 mm
01-04-0042 F18/40 1,90 x 1,90 m 10,60 m³ 4.750 mm
01-04-0044 F18/45 1,90 x 1,90 m 12,20 m³ 5.250 mm
01-04-0046 F21/24 2,20 x 2,20 m 6,30 m³ 3.150 mm
01-04-0048 F21/26 2,20 x 2,20 m 7,20 m³ 3.350 mm
01-04-0050 F21/28 2,20 x 2,20 m 8,20 m³ 3.550 mm
01-04-0052 F21/33 2,20 x 2,20 m 10,70 m³ 4.050 mm
01-04-0054 F21/36 2,20 x 2,20 m 11,70 m³ 4.350 mm
01-04-0056 F21/40 2,20 x 2,20 m 13,30 m³ 4.750 mm
01-04-0058 F21/45 2,20 x 2,20 m 15,30 m³ 5.250 mm
01-04-0060 F24/30 2,50 x 2,50 m 10,90 m³ 3.750 mm
01-04-0062 F24/32 2,50 x 2,50 m 12,10 m³ 3.950 mm
01-04-0064 F24/35 2,50 x 2,50 m 13,60 m³ 4.250 mm
01-04-0066 F24/40 2,50 x 2,50 m 16,60 m³ 4.750 mm
01-04-0068 F24/47 2,50 x 2,50 m 20,70 m³ 5.450 mm
01-04-0070 F30/35 3,10 x 3,10 m 18,70 m³ 4.250 mm
01-04-0072 F30/40 3,10 x 3,10 m 23,20 m³ 4.750 mm
01-04-0074 F30/40 3,10 x 3,10 m 27,70 m³ 5.300 mm
01-04-0076 F32/51 3,30 x 3,30 m 33,50 m³ 6.100 mm
01-04-0078 F32/60 3,35 x 3,35 m 42,00 m³ 7.000 mm
01-04-0080 F35/60 3,65 x 3,65 m 50,00 m³ 7.000 mm

Feed Bin Type ST

The feed bins Type ST consists of galvanised steel plate are useable for compound feed and granulate materials. They are available for mechanical, pneumatic or mechanical and pneumatic filling. Obstruction free hopper plates with smooth protective coating on the inside garantees a good feed flow. We can supply four different diameters with volumes from 3,9m⊃3; to 49,8m⊃3;. The Feed Bins Type ST are supplied unassembled.
[M= mechan. filling; P= pneum. filling; M+P= mechan. and pneum. filling]

Model Diameter Capacity Height
601 1.800 mm 3,9 m³ 3.380 mm
602 1.800 mm 6,0 m³ 4.190 mm
603 1.800 mm 8,1 m³ 5.010 mm
604 1.800 mm 10,2 m³ 5.820 mm
702 2.100 mm 8,7 m³ 4.560 mm
703 2.100 mm 11,6 m³ 5.370 mm
704 2.100 mm 14,5 m³ 6.180 mm
705 2.100 mm 17,4 m³ 7.000 mm
706 2.100 mm 20,3 m³ 7.810 mm
902 2.750 mm 15,8 m³ 5.260 mm
903 2.750 mm 20,6 m³ 6.070 mm
904 2.750 mm 25,0 m³ 6.880 mm
905 2.750 mm 30,2 m³ 7.700 mm
906 2.750 mm 35,0 m³ 8.510 mm
907 2.750 mm 39,8 m³ 9.320 mm
1052 3.150 mm 23,4 m³ 5.790 mm
1053 3.150 mm 30,0 m³ 6.600 mm
1054 3.150 mm 36,6 m³ 7.420 mm
1055 3.150 mm 43,2 m³ 8.230 mm
1056 3.150 mm 49,8 m³ 9.040 mm